They exist in different shapes from the anatomical to the rectangular, with or without wings.  The old composition consisted of the pulp, the carrier tissue, nonwoven, polyethylene (barrier film) which was place inside the nonwoven and the adhesive.

Absorbent products require many performance properties. From acquisition, to transfer layers and absorbent cores, our technical specialists can
select or engineer the right materials.

Nonwoven We can provide different types of nonwoven: 100% polypropylene ( PP), thermobonded or spunbonded 50% Viscose, 50% PP 80% PP, 20% Viscose Bicomponent: 100% PP Perforated Film with different types of holes and hole size Sms Smms Acquisition layer
There are several other types we suggest to visit Fiberweb.
Polyethylene We can provide barrier films from thickness starting from 12 my. Plain PE film PE PP blend barrier film Microembossed PE film for the new backsheet sanitary napkin
Perforated PE Film Exists in different patterns. Textile Back Sheet Available in 25, 27 & 29 gsm Pulp Same as the baby diaper, but usually the reel width is smaller. We can provide any reel width. Silicon release liner We can provide any reel width, with one, two or no colour printing. Grammage starting from 37 gsm. Carrier tissue The carrier tissue is the one that envelops the fluff pulp. There are two types of carrier tissue: A.  Porous(Open): Which has pores as the name indicates. It is mainly used to carry the pad. B.  Non Porous(closed): carrier sheet with no pores. Also carries the cellulose pad.
Hot Melt We can provide a full range of hot-melt adhesives for the Hygienic Industry. We offer the leading hot-melt pressure sensitive adhesives for Sanitary napkins manufacturers: hot-melts for construction and positioning of Sanitary Napkins among others. We can also offer cartooning closure hot-melts, too. Innovation and technical expertise directly to our customers is a must for us. Characteristics of our products are briefly summarized as follows: - Low odor for a safe use and a healthy environment - Very good heat stability that extends machine's life and decreases machine's maintenance costs - Optimum peel force on cotton garments - No residues on ladies garments - Excellent tack-free packaging technology   Printed PE film and Bags We offer different sizes and styles of PE bags ideal for consumer and industrial use. We provide the standard as well as the most complicated and printed bag requirements for the variety of utilization modes. Handles could be structured to accommodate consumer's demand.     Copyright © 2006 AEC FIBERS & CHEMICALS INC. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.